In order to sure measuring accuracy of wind-speed,in this article,operating principle,error source and determine method of calibration coefficient will be introduced in details.
本文將從風速校驗器的工作原理、誤差來源和風速校準參數的確定方法等方面加以介紹。
The error sources, error classification, and the components of the calibration equipment were discussed.
該文針對我國省級氣象計量單位,現用的濕度表(計)檢定裝置,從檢定裝置的組成、主要誤差來源及分類入手,借鑒國內外通用的不確定度分析方法,介紹整個濕度檢定裝置的不確定度測試與評估。
After deeper studies on the measuring instrument of the acceleration of Gravity by Freely Falling, the main source of errors is analysed, and some methods of reducing errors and approving the instrument are given.
本文在對自由落體儀做深入研究的基礎上，指出了用自由落體儀側重力加速度實驗的主要誤差來源和儀器存在的問題，給出了減小誤差和改進儀器的辦法。
Analysis the error sources are helpful to decrease the error of high strain dynamic testing on pile.
與靜載荷試驗對比,分析了高應變動力測樁確定樁基靜力性能的固有問題,還從曲線擬合中參數選擇方面分析了高應變動力試樁的誤差來源,為客觀的應用高應變方法測試樁基提供依據。
As the fifth part of the tutorial, the paper introduces and discusses the sources of errors in elevation/deformation measurements derived with InSAR, and conducts modeling for the main error sources (i.
作為InSAR系列講座的第五篇,本文介紹InSAR高程與形變測量中的誤差來源,對主要誤差源(干涉相位、基線參數和地形數據)推導出誤差傳播模型。
This paper introduces measurement principle of new 500kV voltage transformer calibration system,analyses the error origin of the calibration system,calculates the uncertainty in measurement,testes and verifies the accuracy of the calibration system.
介紹了新型的500kV電壓互感器測試系統的測試原理,分析了測試系統的誤差來源和不確定度的計算。
Major error origins are error related with GPS satellite,error related with signal propagation and error related with accepting equipments.
GPS定位的精度受到諸多因素的影響,其主要誤差來源包括與GPS衛星有關的誤差、與信號傳播有關的誤差、與接受設備有關的誤差。
It can provide simulation information for policy making at macro scale despite existing uncertainties.
將CERES-Wheat模型升尺度進行區域模擬,利用區域校準后的CERES-Wheat模型,模擬了1981—2000年全國各網格小麥產量,與同期農調隊調查產量相比較,以探討CERES-Wheat模型在我國小麥區的模擬效果及誤差來源。
Operational Principle and Error Analysis Based on Strain Gauge Load Cell
負荷傳感器工作原理與誤差來源分析
The Origin of Error in Measuring Capacity and Inductance by Alternating Current Bridge and Its Removal;
交流電橋測電容和電感的誤差來源及消除
Reasons and Control of Length-measuring Errors in the Process of the Mechanical Products Processing;
機械產品加工中長度測量誤差來源與控制
The performance of regional simulation of CERES-Rice model and its uncertainties
站點CERES-Rice模型區域應用效果和誤差來源
Accuracy Check and Analysis of LIDAR Elevation Data
機載LIDAR點云高程數據精度檢核及誤差來源分析
The Performance of CERES-Wheat Model in Wheat Planting Areas and Its Uncertainties
CERES-Wheat模型在我國小麥區的應用效果及誤差來源
Digital Error Sources of Geological Map Based on MapGIS and its Countermeasures
基于MapGIS的地質圖數字化誤差來源和對策
Abstract: The error sources of some data acquisition methods are discussed in digital cartography, and these errors are analysed.
文摘:討論了數字制圖幾種數據采集方式的誤差來源，并對這些誤差進行了分析評價。
“ In the best cesium fountains the largest source of error are so-called cold collisions,” Gibble explained.
吉布解釋：「最好的銫原子噴泉鐘內，最大的誤差來源是所謂的冷碰撞。
The error sources of spectrophotometric determination of manganese in steel and alloy are analyzed.
分析了光度法測定鋼鐵及合金中錳含量的誤差來源。
On the base, the error sources of the whole accelerator"s system are analyzed.
在此基礎上，對整個加速度計系統的誤差來源進行了分析。
Error origin and countermeasure on the analysis of acetaldehyde content in bottle grade PET chip
瓶級聚酯切片中乙醛含量分析的誤差來源及對策
Origins Analysis and Post Screening of Errors of Measurement in Corn Yield Sample Surveys;
農產量抽樣調查中計量誤差來源分析及其事后甄別
The Testing Technology of Rockwell Hardness and Uncertainty in Measurement of Rockwell Hardness Blocks
洛氏硬度測量的誤差來源及洛氏硬度塊的測量結果不確定度
This paper deduces the errors sources from the process of ultrasonic longitudinal wave testing and evaluates its uncertainty.
本文分析了超聲波探傷縱波檢測的誤差來源，評定了在探傷過程中的不確定度。
burden error of PT
電源變壓器負載誤差
In sinusoidal phase modulating laser diode interferometer, the main error source is the variation in output light intensity of light source.
在半導體激光正弦相位調制干涉儀中，光源輸出光強的變化是測量誤差的主要來源。
Global Positioning System (GPS) Error Source Prediction; Master's thesis
全球定位系統(GPS)誤差源預測/碩士論文